Denon DP-300F – Automatic Analog Turntable

DP-300F Turntable

Highlights & Key Technologies

Automatic playback with manual control
Fully automatic operation makes the DP-300F easy to use. With the touch of a button, the tonearm swings over and begins playing your record, returning to its original position when finished. The manual lifter mechanism lets you accurately place the stylus on the record wherever you want without scratching.

Switchable phono preamp for hookup flexibility
DP-300F features a built-in phono pre-amp that lets you connect the turntable to an ordinary auxiliary input on your receiver or audio system. But if your receiver has a dedicated phono input, and you'd prefer to use it, you can switch off the pre-amp.

Speed selector
Supports playback at 33 1/3 rpm and 45 rpm. Easily play your vinyl collection and enjoy its full breadth.

Refined External Design
The DP-300F's 4mm-thick cabinet wall that offers both strength and high density has been beautifully finished with a gloss coating. The straight tone arm and aluminum diecast turntable have been formed in a slim, textually attractive design. With a body width of 434mm, it combines very elegantly with full-size system components.

Fully Automatic Player
When the 30cm or 17cm record size is selected, with a simple operation the tone arm automatically moves and plays the record and then returns when playback ends. Different cartridges can be used as desired, and since fine adjustments can also be made for anti-skating and zero balance, ideal conditions for playing a record can be achieved.

Straight Tone Arm
The DP-300F's straight tone arm brings out the maximum performance of cartridges with superior tracing capabilities. The supplied cartridge can be replaced with a variety of commercially available cartridges. (Compatible cartridge weight: 5.0 - 10.0 g)

Diecast Aluminum Turntable
The DP-300F's turntable has been constructed of diecast aluminum to achieve high inertial mass for stable rotation. The vibration-resistant turntable sheet is about 5mm thick and uses hologram vibration analysis to improve its ability to hold a record.

Built-in PHONO Equalizer
Since the DP-300F includes a built-in PHONO equalizer, it can be connected directly to a mini component or integrated amp that does not have a PHONO terminal. (ON/OFF switchable)

Manual Arm Lifter
The DP-300F is also equipped with an arm lifter mechanism to facilitate manual operation. The arm lifter makes it easy to place or remove the needle from any location on the record.

Details & Specifications

Turntable Motor Section
Drive system: Belt
Speed: 33 1/3, 45 rpm
Wow & flutter: 0,10% (WRMS)
Turntable: Diecast aluminum

Tone arm
Type: Straight
Effective length: 221.5 mm, 8.72 inch
Overhang: 19 mm, 0.75 inch
Tracking error: Within 3°
Stylus pressure range: 0-4.0g (0.1g increments)
Compatible cartridge weight: 5.0 10.0g (excluding headshell)

Cartridge
Type: MM (moving magnet)
Appropriate needle pressure: 2.0g
Cartridge weight: 5g
Replacement needle: DSN-85
Supplied headshell weight: 10g
Shell Replacement: PCL-310SP [Premium Silver] or PCL-310K [Black]

General
Power supply: AC 120V, 60 Hz
Power consumption: 2W
Dimensions: 434 (W) x 122 (H) x 381 (D) mm / 17.1 (W) x 4.8 (H) x 15.0 (D) inch (including feet)
Weight: 5.5 kg / 12.13 lbs

IGNORE: DP300F, DP-300F, DP300-F, DP-300-F, DP-300 F, DP 300 F, DP 300F