Engineered weather resistance
With its engineered, weather-resistant features, the E-80 WR in-ceiling loudspeaker is suitable for covered outdoor and high-humidity locations. With a working range of -20 to +60°C and IP65 rating, it's ready to take on the elements. So whether you want background music for the laundry room, bathroom or spa, or immersive multi-channel sound on the terrace, the E-80 WR delivers.

Class-leading sound quality
The large diameter bass/midrange driver incorporates a stiff yet light polypropylene cone and a very low-loss rubber surround for uncoloured and natural midrange combined with deep and rich low frequency performance. The E-80 WR's 25 mm textile dome tweeter offers an impressively extended and detailed upper frequency response.

Functional versatility
The E-80 WR is more than just an in-ceiling loudspeaker – it's a high-performance sound solution for almost any ceiling and application. Install one or two speakers in your bathroom for high-quality tunes as you shower or several on the terrace for an immersive multi-channel audio space.

Easy installation
The dogleg clamp system makes for straightforward installation without the need for special tools. Simply connect the cables to the spring terminals, insert the speaker and turn the four clamp screws to tighten it into place. The speaker is also slim enough to fit into almost any standard ceiling.

Paintable magnetic grille
The white magnetic grille helps the E-80 WR blend discreetly into any room, while the paintable surface lets you add a splash of colour for an aesthetic twist. The grille is also electroplated to add extra protection against the elements.

Tilted drivers
The 5° off-axis tilt of the E-80 WR drivers means you can rotate the speaker to direct more sound toward the primary listening position. The tilted design also minimises resonance from the driver and baffle, which helps to lower distortion and colouration for a more accurate audio reproduction.

Technical Specifications

Frequency range: 49 - 25,000 Hz ±3 dB
Sensitivity: 89 dB @ 1 m for 2.83 V
Nominal impedance: 6 ohm
Maximum SPL: 107 dB
Crossover frequency: 3,200 Hz
Crossover principle: 2-way
Recommended amplifier power: 30 - 150 Watt
High frequency driver: 1 x 25 mm soft dome
High frequency diaphragm: Soft woven fabric
Low/Mid frequency driver: 1 x 8 inch
Low/Mid frequency diaphragm: Polypropylene
Connection input: Single wire
Enclosure type: Open back
Installation location: Normal/High+, Normal/Mid+, Galvanized grille
Installation location: In-ceiling/In-wall
Recommended placement: Ceiling/Front/Centre/Surround
IP rating: IP65
Outer dimensions incl. grille (H x W x D): Ø295 x 116 mm / Ø 11.61 x 4.57 inches
Outer dimensions excl. grille (H x W x D): Ø 278 x 113 mm / Ø10.94 x 4.45 inches
Cut-out dimensions: Ø 261 mm / Ø 10.28 inches
Mounting depth: 109 mm / 4.29 inches
Recommended rear volume (backbox): 10 - 100 litres
Optimum rear volume: 30 litres
Ceiling/wall thickness (total dog-leg span): 10 - 70 mm / 0.39 - 2.76 inches
Weight incl.grille: 2.50 kg / 5.51 lb
Shipping weight: 3.50 kg / 7.71 lb
Finish: White
Accessories: Manual, Cut-out template, Front grille, Logo badge
Optional accessories: Pre-construction Kit (sold separately)